Mesh Radio Supply
Build a kitKit

Rokland, outdoor omni antenna

5.8 dBi N-male outdoor omni antenna, 915 MHz

A 31 to 32 inch fiberglass omni rated 5.1 to 5.8 dBi across 860 to 930 MHz, with an N-male connector and a pole bracket.

Manufacturer specs only Not yet available

Best for

A roof or mast node that needs to reach far across fairly flat ground.

Photo pending: we only show images we own or are licensed to use.

Strengths and limitations

Strengths

  • Listed VSWR of 2 or less.
  • Rated 50 W input and a 60 m/s wind rating.
  • Pole bracket for masts up to 1.5 in.

Limitations

  • Long and visible.
  • Gain quoted as a range (5.1 to 5.8 dBi).
  • Retailer specs; no independent pattern test.

What it does not do

  • Fit a radio directly: you need coax and an adapter to your radio's SMA, RP-SMA or IPEX connector.
  • Cover steep angles well: higher gain narrows the vertical beam (35° listed). Nearby nodes far below or above can be weaker.

Specifications

From the cited source on 2026-10-26. "Not verified" means no source we checked published it.

Gain 5.1 to 5.8 dBi [1]
Frequency 860 to 930 MHz [1]
Connector N-male [1]
Length About 31.75 in [1]
VSWR 2 or less [1]
Vertical beamwidth 35° [1]
Max input power 50 W [1]
Wind rating 60 m/s [1]

Before you buy

  • Under 6 dBi, so the US full-power limit applies without reduction (47 CFR 15.247). Coax loss still subtracts from what reaches the antenna.

Sources

  1. 5.8 dBi N-Male Omni Outdoor 915 MHz Antenna, Rokland (retailer), read 2026-10-26.
  2. 47 CFR 15.247: Operation within the bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz, eCFR (US Government) (regulator), read 2026-10-26. Current as of 2026-10-22. (b)(3) 1 W for digital modulation in 902-928 MHz; (b)(2) frequency hopping limits; (b)(4) reduce conducted power by antenna gain above 6 dBi.

Comparable options

Same kind of product. Tick two or more to compare.

Guides that use it